For Volkswagen Vw Passat B8.5 (2019–2021) Chrome Exhaust-Look Diffuser – High Quality
$85.00
Regular price $70.00Upgrade Your Passat B8.5 with a Stunning Chrome Exhaust-Look Diffuser.
Enhance the sporty, luxurious look of your Volkswagen Passat B8.5 (2019–2021) with this high-quality chrome exhaust-look rear diffuser. Designed to mimic the appearance of dual chrome exhausts, it adds an aggressive yet elegant finish to your vehicle’s rear bumper.
Made from durable materials with a flawless chrome finish, this diffuser fits perfectly and improves the visual impact of your Passat’s rear end without altering the actual exhaust system.
✅ Key Features:
-
Compatible with VW Passat B8.5 models (2019–2021)
-
High-quality chrome finish for a premium look
-
Durable, weather-resistant construction
-
OEM-style design for perfect fitment
-
Easy installation with existing mounting points
🔥 Elevate your Passat’s rear styling — premium look, maximum impact.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- Ambient temperature during assembly must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive materials such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- During the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the adhered part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
Upgrade Your Passat B8.5 with a Stunning Chrome Exhaust-Look Diffuser.
Enhance the sporty, luxurious look of your Volkswagen Passat B8.5 (2019–2021) with this high-quality chrome exhaust-look rear diffuser. Designed to mimic the appearance of dual chrome exhausts, it adds an aggressive yet elegant finish to your vehicle’s rear bumper.
Made from durable materials with a flawless chrome finish, this diffuser fits perfectly and improves the visual impact of your Passat’s rear end without altering the actual exhaust system.
✅ Key Features:
-
Compatible with VW Passat B8.5 models (2019–2021)
-
High-quality chrome finish for a premium look
-
Durable, weather-resistant construction
-
OEM-style design for perfect fitment
-
Easy installation with existing mounting points
🔥 Elevate your Passat’s rear styling — premium look, maximum impact.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- Ambient temperature during assembly must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive materials such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- During the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the adhered part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
For Volkswagen Vw Passat B8.5 (2019–2021) Chrome Exhaust-Look Diffuser – High Quality
$85.00
Regular price $70.00Upgrade Your Passat B8.5 with a Stunning Chrome Exhaust-Look Diffuser.
Enhance the sporty, luxurious look of your Volkswagen Passat B8.5 (2019–2021) with this high-quality chrome exhaust-look rear diffuser. Designed to mimic the appearance of dual chrome exhausts, it adds an aggressive yet elegant finish to your vehicle’s rear bumper.
Made from durable materials with a flawless chrome finish, this diffuser fits perfectly and improves the visual impact of your Passat’s rear end without altering the actual exhaust system.
✅ Key Features:
-
Compatible with VW Passat B8.5 models (2019–2021)
-
High-quality chrome finish for a premium look
-
Durable, weather-resistant construction
-
OEM-style design for perfect fitment
-
Easy installation with existing mounting points
🔥 Elevate your Passat’s rear styling — premium look, maximum impact.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- Ambient temperature during assembly must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive materials such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- During the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the adhered part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
Upgrade Your Passat B8.5 with a Stunning Chrome Exhaust-Look Diffuser.
Enhance the sporty, luxurious look of your Volkswagen Passat B8.5 (2019–2021) with this high-quality chrome exhaust-look rear diffuser. Designed to mimic the appearance of dual chrome exhausts, it adds an aggressive yet elegant finish to your vehicle’s rear bumper.
Made from durable materials with a flawless chrome finish, this diffuser fits perfectly and improves the visual impact of your Passat’s rear end without altering the actual exhaust system.
✅ Key Features:
-
Compatible with VW Passat B8.5 models (2019–2021)
-
High-quality chrome finish for a premium look
-
Durable, weather-resistant construction
-
OEM-style design for perfect fitment
-
Easy installation with existing mounting points
🔥 Elevate your Passat’s rear styling — premium look, maximum impact.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- Ambient temperature during assembly must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive materials such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- During the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the adhered part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.