Chrome Side Door Trim Set for Peugeot 2008 (2020–2026) – 4PCS Exterior Styling Molding
$95.00
Regular price $85.00Add a Touch of Class to Your Peugeot 2008 – Chrome Side Door Trim Set (4PCS)
Transform the side profile of your Peugeot 2008 (2020–2026) with this elegant 4-piece chrome door molding trim set. Designed for a perfect fit, these trims enhance your vehicle’s lines while adding a luxurious, OEM-style chrome accent.
🚗 Compatible with Peugeot 2008 models from 2020 to 2026
💎 Includes 4 pieces – covers all four side doors
✨ Bright mirror chrome finish – adds a premium touch
🛡️ Made from high-quality ABS – UV & weather resistant
🛠️ Easy installation – pre-applied 3M adhesive backing
🎯 Precision cut for perfect edge-to-edge alignment
Ideal for drivers who want a subtle yet stylish exterior upgrade that looks factory-installed but stands out in the crowd.
Refine the lines. Add shine. Drive with elegance.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
ATTENTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
Add a Touch of Class to Your Peugeot 2008 – Chrome Side Door Trim Set (4PCS)
Transform the side profile of your Peugeot 2008 (2020–2026) with this elegant 4-piece chrome door molding trim set. Designed for a perfect fit, these trims enhance your vehicle’s lines while adding a luxurious, OEM-style chrome accent.
🚗 Compatible with Peugeot 2008 models from 2020 to 2026
💎 Includes 4 pieces – covers all four side doors
✨ Bright mirror chrome finish – adds a premium touch
🛡️ Made from high-quality ABS – UV & weather resistant
🛠️ Easy installation – pre-applied 3M adhesive backing
🎯 Precision cut for perfect edge-to-edge alignment
Ideal for drivers who want a subtle yet stylish exterior upgrade that looks factory-installed but stands out in the crowd.
Refine the lines. Add shine. Drive with elegance.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
ATTENTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
Chrome Side Door Trim Set for Peugeot 2008 (2020–2026) – 4PCS Exterior Styling Molding
$95.00
Regular price $85.00Add a Touch of Class to Your Peugeot 2008 – Chrome Side Door Trim Set (4PCS)
Transform the side profile of your Peugeot 2008 (2020–2026) with this elegant 4-piece chrome door molding trim set. Designed for a perfect fit, these trims enhance your vehicle’s lines while adding a luxurious, OEM-style chrome accent.
🚗 Compatible with Peugeot 2008 models from 2020 to 2026
💎 Includes 4 pieces – covers all four side doors
✨ Bright mirror chrome finish – adds a premium touch
🛡️ Made from high-quality ABS – UV & weather resistant
🛠️ Easy installation – pre-applied 3M adhesive backing
🎯 Precision cut for perfect edge-to-edge alignment
Ideal for drivers who want a subtle yet stylish exterior upgrade that looks factory-installed but stands out in the crowd.
Refine the lines. Add shine. Drive with elegance.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
ATTENTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
Add a Touch of Class to Your Peugeot 2008 – Chrome Side Door Trim Set (4PCS)
Transform the side profile of your Peugeot 2008 (2020–2026) with this elegant 4-piece chrome door molding trim set. Designed for a perfect fit, these trims enhance your vehicle’s lines while adding a luxurious, OEM-style chrome accent.
🚗 Compatible with Peugeot 2008 models from 2020 to 2026
💎 Includes 4 pieces – covers all four side doors
✨ Bright mirror chrome finish – adds a premium touch
🛡️ Made from high-quality ABS – UV & weather resistant
🛠️ Easy installation – pre-applied 3M adhesive backing
🎯 Precision cut for perfect edge-to-edge alignment
Ideal for drivers who want a subtle yet stylish exterior upgrade that looks factory-installed but stands out in the crowd.
Refine the lines. Add shine. Drive with elegance.
There is double-sided tape on the back of the products.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
ATTENTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.