Chrome Side Door Trim for Peugeot 3008 (2016–2022) – 4PCS Stainless Steel Streamer Styling Kit
$77.00
Regular price $67.00Add Shine to the Sides – Chrome Up Your Peugeot 3008 in Minutes!
Upgrade the look of your Peugeot 3008 (model years 2016–2022) with this 4-piece Chrome Side Door Trim Streamer Kit. Made from high-grade stainless steel, these polished trims provide a sleek, modern accent while protecting your vehicle’s side panels from light scratches and dings.
✅ Designed for perfect fit – 2016 to 2022 Peugeot 3008
✅ Mirror-like chrome finish – premium and sporty look
✅ Durable stainless steel – rust & weather-resistant
✅ Installs easily with automotive 3M tape – no drilling required
✅ Enhances appearance & protects your paint
Whether you're cruising in the city or parked at the curb, these trims ensure your 3008 looks sharp, modern, and unmistakably stylish.
Chrome isn’t just a finish – it’s a statement. Stand out with confidence.
Assembly Instruction: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...
Add Shine to the Sides – Chrome Up Your Peugeot 3008 in Minutes!
Upgrade the look of your Peugeot 3008 (model years 2016–2022) with this 4-piece Chrome Side Door Trim Streamer Kit. Made from high-grade stainless steel, these polished trims provide a sleek, modern accent while protecting your vehicle’s side panels from light scratches and dings.
✅ Designed for perfect fit – 2016 to 2022 Peugeot 3008
✅ Mirror-like chrome finish – premium and sporty look
✅ Durable stainless steel – rust & weather-resistant
✅ Installs easily with automotive 3M tape – no drilling required
✅ Enhances appearance & protects your paint
Whether you're cruising in the city or parked at the curb, these trims ensure your 3008 looks sharp, modern, and unmistakably stylish.
Chrome isn’t just a finish – it’s a statement. Stand out with confidence.
Assembly Instruction: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...
Chrome Side Door Trim for Peugeot 3008 (2016–2022) – 4PCS Stainless Steel Streamer Styling Kit
$77.00
Regular price $67.00Add Shine to the Sides – Chrome Up Your Peugeot 3008 in Minutes!
Upgrade the look of your Peugeot 3008 (model years 2016–2022) with this 4-piece Chrome Side Door Trim Streamer Kit. Made from high-grade stainless steel, these polished trims provide a sleek, modern accent while protecting your vehicle’s side panels from light scratches and dings.
✅ Designed for perfect fit – 2016 to 2022 Peugeot 3008
✅ Mirror-like chrome finish – premium and sporty look
✅ Durable stainless steel – rust & weather-resistant
✅ Installs easily with automotive 3M tape – no drilling required
✅ Enhances appearance & protects your paint
Whether you're cruising in the city or parked at the curb, these trims ensure your 3008 looks sharp, modern, and unmistakably stylish.
Chrome isn’t just a finish – it’s a statement. Stand out with confidence.
Assembly Instruction: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...
Add Shine to the Sides – Chrome Up Your Peugeot 3008 in Minutes!
Upgrade the look of your Peugeot 3008 (model years 2016–2022) with this 4-piece Chrome Side Door Trim Streamer Kit. Made from high-grade stainless steel, these polished trims provide a sleek, modern accent while protecting your vehicle’s side panels from light scratches and dings.
✅ Designed for perfect fit – 2016 to 2022 Peugeot 3008
✅ Mirror-like chrome finish – premium and sporty look
✅ Durable stainless steel – rust & weather-resistant
✅ Installs easily with automotive 3M tape – no drilling required
✅ Enhances appearance & protects your paint
Whether you're cruising in the city or parked at the curb, these trims ensure your 3008 looks sharp, modern, and unmistakably stylish.
Chrome isn’t just a finish – it’s a statement. Stand out with confidence.
Assembly Instruction: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...