Chrome Front Grille Trim for Peugeot Rifter (2019–2026) – 6PCS Exterior Styling Chrome Kit
$65.00
Regular price $54.00Shine Where It Matters Most – Front-End Elegance for Your Peugeot Rifter!
Add bold character and premium shine to your Peugeot Rifter (2019–2026) with this 6-piece Chrome Front Grille Trim Kit. Made of durable, weatherproof chrome-plated ABS, this kit transforms the front of your vehicle in minutes – giving it a modern, upscale look without needing a full replacement.
✨ Fits Peugeot Rifter models from 2019 to 2026
💎 6 precision-cut pieces for full grille coverage
🛡️ Made from high-grade ABS – chrome finish, rustproof
🛠️ Easy installation with 3M adhesive – no tools or drilling
🚘 Gives your vehicle a luxurious, custom appearance
Perfect for drivers who want their car to stand out with minimal effort. Whether you're into subtle upgrades or head-turning style, this grille trim makes a lasting impression.
Make your first impression in chrome. Drive sharp, drive Rifter.
Peugeot Rifter Chrome Front Grille 6 Pcs. 2019 and Above
Vehicle-Specific Chrome Accessory
Product features:
Chrome products are produced with a mold system specially for the part on which it will be applied on the vehicle.
Chrome products are produced from A class A 304 stainless steel.
The products are sent ready for assembly with the high double-sided acrylic tape on the back.
Assembly Instruction:
Make the assembly in a dry and dust-free environment.
After unpacking the product, make sure to perform an assembly exercise on the area where it will be applied without removing the protective surface of the double-sided tape on it.
Thoroughly clean the surface to be adhered to with a cleaning liquid (alcohol, spirit, cellulosic thinner, etc.). (Do not clean with liquids containing additives such as perfumed cologne, wet wipes, gasoline, etc.) Cleaning of the floor is very important for assembly. Plastic parts with oily and shiny surfaces such as glass wick, door protection tape should be cleaned until this floor disappears.
If there is an adhesive reinforcing "Primer" wipe in the product (Primer: It is a chemical liquid to be applied to plastic surfaces. It is not/should not be used on the painted surfaces of the vehicle), apply it to the cleaned surface only to the area where the tapes on the back of the product will stick and the product will cover. (Be careful not to apply to the parts where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show its full properties. After removing the protective surface of the tape, use a hair dryer, etc., to increase the adhesion force. Apply heat to the tape with the help of
After removing the protective surface of the tape on the back of the product and applying heat, apply the product at once to the cleaned and, if necessary, primed area. Apply pressure with a dry cloth to ensure that it adheres well. In order for the product to adhere firmly, protect it from water for 24 hours and take care not to wash your vehicle with pressurized water for 48 hours.
Shine Where It Matters Most – Front-End Elegance for Your Peugeot Rifter!
Add bold character and premium shine to your Peugeot Rifter (2019–2026) with this 6-piece Chrome Front Grille Trim Kit. Made of durable, weatherproof chrome-plated ABS, this kit transforms the front of your vehicle in minutes – giving it a modern, upscale look without needing a full replacement.
✨ Fits Peugeot Rifter models from 2019 to 2026
💎 6 precision-cut pieces for full grille coverage
🛡️ Made from high-grade ABS – chrome finish, rustproof
🛠️ Easy installation with 3M adhesive – no tools or drilling
🚘 Gives your vehicle a luxurious, custom appearance
Perfect for drivers who want their car to stand out with minimal effort. Whether you're into subtle upgrades or head-turning style, this grille trim makes a lasting impression.
Make your first impression in chrome. Drive sharp, drive Rifter.
Peugeot Rifter Chrome Front Grille 6 Pcs. 2019 and Above
Vehicle-Specific Chrome Accessory
Product features:
Chrome products are produced with a mold system specially for the part on which it will be applied on the vehicle.
Chrome products are produced from A class A 304 stainless steel.
The products are sent ready for assembly with the high double-sided acrylic tape on the back.
Assembly Instruction:
Make the assembly in a dry and dust-free environment.
After unpacking the product, make sure to perform an assembly exercise on the area where it will be applied without removing the protective surface of the double-sided tape on it.
Thoroughly clean the surface to be adhered to with a cleaning liquid (alcohol, spirit, cellulosic thinner, etc.). (Do not clean with liquids containing additives such as perfumed cologne, wet wipes, gasoline, etc.) Cleaning of the floor is very important for assembly. Plastic parts with oily and shiny surfaces such as glass wick, door protection tape should be cleaned until this floor disappears.
If there is an adhesive reinforcing "Primer" wipe in the product (Primer: It is a chemical liquid to be applied to plastic surfaces. It is not/should not be used on the painted surfaces of the vehicle), apply it to the cleaned surface only to the area where the tapes on the back of the product will stick and the product will cover. (Be careful not to apply to the parts where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show its full properties. After removing the protective surface of the tape, use a hair dryer, etc., to increase the adhesion force. Apply heat to the tape with the help of
After removing the protective surface of the tape on the back of the product and applying heat, apply the product at once to the cleaned and, if necessary, primed area. Apply pressure with a dry cloth to ensure that it adheres well. In order for the product to adhere firmly, protect it from water for 24 hours and take care not to wash your vehicle with pressurized water for 48 hours.
Chrome Front Grille Trim for Peugeot Rifter (2019–2026) – 6PCS Exterior Styling Chrome Kit
$65.00
Regular price $54.00Shine Where It Matters Most – Front-End Elegance for Your Peugeot Rifter!
Add bold character and premium shine to your Peugeot Rifter (2019–2026) with this 6-piece Chrome Front Grille Trim Kit. Made of durable, weatherproof chrome-plated ABS, this kit transforms the front of your vehicle in minutes – giving it a modern, upscale look without needing a full replacement.
✨ Fits Peugeot Rifter models from 2019 to 2026
💎 6 precision-cut pieces for full grille coverage
🛡️ Made from high-grade ABS – chrome finish, rustproof
🛠️ Easy installation with 3M adhesive – no tools or drilling
🚘 Gives your vehicle a luxurious, custom appearance
Perfect for drivers who want their car to stand out with minimal effort. Whether you're into subtle upgrades or head-turning style, this grille trim makes a lasting impression.
Make your first impression in chrome. Drive sharp, drive Rifter.
Peugeot Rifter Chrome Front Grille 6 Pcs. 2019 and Above
Vehicle-Specific Chrome Accessory
Product features:
Chrome products are produced with a mold system specially for the part on which it will be applied on the vehicle.
Chrome products are produced from A class A 304 stainless steel.
The products are sent ready for assembly with the high double-sided acrylic tape on the back.
Assembly Instruction:
Make the assembly in a dry and dust-free environment.
After unpacking the product, make sure to perform an assembly exercise on the area where it will be applied without removing the protective surface of the double-sided tape on it.
Thoroughly clean the surface to be adhered to with a cleaning liquid (alcohol, spirit, cellulosic thinner, etc.). (Do not clean with liquids containing additives such as perfumed cologne, wet wipes, gasoline, etc.) Cleaning of the floor is very important for assembly. Plastic parts with oily and shiny surfaces such as glass wick, door protection tape should be cleaned until this floor disappears.
If there is an adhesive reinforcing "Primer" wipe in the product (Primer: It is a chemical liquid to be applied to plastic surfaces. It is not/should not be used on the painted surfaces of the vehicle), apply it to the cleaned surface only to the area where the tapes on the back of the product will stick and the product will cover. (Be careful not to apply to the parts where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show its full properties. After removing the protective surface of the tape, use a hair dryer, etc., to increase the adhesion force. Apply heat to the tape with the help of
After removing the protective surface of the tape on the back of the product and applying heat, apply the product at once to the cleaned and, if necessary, primed area. Apply pressure with a dry cloth to ensure that it adheres well. In order for the product to adhere firmly, protect it from water for 24 hours and take care not to wash your vehicle with pressurized water for 48 hours.
Shine Where It Matters Most – Front-End Elegance for Your Peugeot Rifter!
Add bold character and premium shine to your Peugeot Rifter (2019–2026) with this 6-piece Chrome Front Grille Trim Kit. Made of durable, weatherproof chrome-plated ABS, this kit transforms the front of your vehicle in minutes – giving it a modern, upscale look without needing a full replacement.
✨ Fits Peugeot Rifter models from 2019 to 2026
💎 6 precision-cut pieces for full grille coverage
🛡️ Made from high-grade ABS – chrome finish, rustproof
🛠️ Easy installation with 3M adhesive – no tools or drilling
🚘 Gives your vehicle a luxurious, custom appearance
Perfect for drivers who want their car to stand out with minimal effort. Whether you're into subtle upgrades or head-turning style, this grille trim makes a lasting impression.
Make your first impression in chrome. Drive sharp, drive Rifter.
Peugeot Rifter Chrome Front Grille 6 Pcs. 2019 and Above
Vehicle-Specific Chrome Accessory
Product features:
Chrome products are produced with a mold system specially for the part on which it will be applied on the vehicle.
Chrome products are produced from A class A 304 stainless steel.
The products are sent ready for assembly with the high double-sided acrylic tape on the back.
Assembly Instruction:
Make the assembly in a dry and dust-free environment.
After unpacking the product, make sure to perform an assembly exercise on the area where it will be applied without removing the protective surface of the double-sided tape on it.
Thoroughly clean the surface to be adhered to with a cleaning liquid (alcohol, spirit, cellulosic thinner, etc.). (Do not clean with liquids containing additives such as perfumed cologne, wet wipes, gasoline, etc.) Cleaning of the floor is very important for assembly. Plastic parts with oily and shiny surfaces such as glass wick, door protection tape should be cleaned until this floor disappears.
If there is an adhesive reinforcing "Primer" wipe in the product (Primer: It is a chemical liquid to be applied to plastic surfaces. It is not/should not be used on the painted surfaces of the vehicle), apply it to the cleaned surface only to the area where the tapes on the back of the product will stick and the product will cover. (Be careful not to apply to the parts where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show its full properties. After removing the protective surface of the tape, use a hair dryer, etc., to increase the adhesion force. Apply heat to the tape with the help of
After removing the protective surface of the tape on the back of the product and applying heat, apply the product at once to the cleaned and, if necessary, primed area. Apply pressure with a dry cloth to ensure that it adheres well. In order for the product to adhere firmly, protect it from water for 24 hours and take care not to wash your vehicle with pressurized water for 48 hours.