4PCS Stainless Steel Chrome Interior Door Sill for Peugeot 408 (2022–2025) – Premium Car Entry Guard Plates
$150.00
Regular price $129.00Protect with Style – Make Every Entry into Your Peugeot 408 Feel Premium!
Upgrade your driving experience with this 4-piece Stainless Steel Chrome Interior Door Sill Kit, custom-designed for Peugeot 408 models from 2022 to 2025. Not only do these sleek guards protect your door sills from scratches, scuffs, and wear, but they also enhance your car’s interior with a touch of luxury and refinement.
✨ High-quality stainless steel – anti-rust & long-lasting
🚪 Custom-fit for Peugeot 408 (2022–2025)
🔧 Quick installation – 3M adhesive, no drilling required
🚗 Protects from scuffs, dirt, and everyday wear
💎 Chrome finish – adds an elegant, premium touch
From daily commutes to weekend getaways, keep your vehicle’s entry points looking flawless. Let your passengers be impressed every time they open the door.
Luxury starts where the door opens. Protect and impress in one move.
Product Features: Chrome products are produced from class A 304 quality stainless steel with a mold system specifically for the part on the vehicle where they will be applied. The products are shipped ready for installation with high quality double-sided acrylic tape on the back. IMPORTANT NOTE; If you think it is incompatible with your vehicle, please do not install it. Returns of any product whose protective tapes have been removed, scratched during installation attempts, or become unsuitable for resale are not accepted. When returning the product, take care to package it as it was sent to you. Assembly Instructions: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...
Protect with Style – Make Every Entry into Your Peugeot 408 Feel Premium!
Upgrade your driving experience with this 4-piece Stainless Steel Chrome Interior Door Sill Kit, custom-designed for Peugeot 408 models from 2022 to 2025. Not only do these sleek guards protect your door sills from scratches, scuffs, and wear, but they also enhance your car’s interior with a touch of luxury and refinement.
✨ High-quality stainless steel – anti-rust & long-lasting
🚪 Custom-fit for Peugeot 408 (2022–2025)
🔧 Quick installation – 3M adhesive, no drilling required
🚗 Protects from scuffs, dirt, and everyday wear
💎 Chrome finish – adds an elegant, premium touch
From daily commutes to weekend getaways, keep your vehicle’s entry points looking flawless. Let your passengers be impressed every time they open the door.
Luxury starts where the door opens. Protect and impress in one move.
Product Features: Chrome products are produced from class A 304 quality stainless steel with a mold system specifically for the part on the vehicle where they will be applied. The products are shipped ready for installation with high quality double-sided acrylic tape on the back. IMPORTANT NOTE; If you think it is incompatible with your vehicle, please do not install it. Returns of any product whose protective tapes have been removed, scratched during installation attempts, or become unsuitable for resale are not accepted. When returning the product, take care to package it as it was sent to you. Assembly Instructions: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...
4PCS Stainless Steel Chrome Interior Door Sill for Peugeot 408 (2022–2025) – Premium Car Entry Guard Plates
$150.00
Regular price $129.00Protect with Style – Make Every Entry into Your Peugeot 408 Feel Premium!
Upgrade your driving experience with this 4-piece Stainless Steel Chrome Interior Door Sill Kit, custom-designed for Peugeot 408 models from 2022 to 2025. Not only do these sleek guards protect your door sills from scratches, scuffs, and wear, but they also enhance your car’s interior with a touch of luxury and refinement.
✨ High-quality stainless steel – anti-rust & long-lasting
🚪 Custom-fit for Peugeot 408 (2022–2025)
🔧 Quick installation – 3M adhesive, no drilling required
🚗 Protects from scuffs, dirt, and everyday wear
💎 Chrome finish – adds an elegant, premium touch
From daily commutes to weekend getaways, keep your vehicle’s entry points looking flawless. Let your passengers be impressed every time they open the door.
Luxury starts where the door opens. Protect and impress in one move.
Product Features: Chrome products are produced from class A 304 quality stainless steel with a mold system specifically for the part on the vehicle where they will be applied. The products are shipped ready for installation with high quality double-sided acrylic tape on the back. IMPORTANT NOTE; If you think it is incompatible with your vehicle, please do not install it. Returns of any product whose protective tapes have been removed, scratched during installation attempts, or become unsuitable for resale are not accepted. When returning the product, take care to package it as it was sent to you. Assembly Instructions: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...
Protect with Style – Make Every Entry into Your Peugeot 408 Feel Premium!
Upgrade your driving experience with this 4-piece Stainless Steel Chrome Interior Door Sill Kit, custom-designed for Peugeot 408 models from 2022 to 2025. Not only do these sleek guards protect your door sills from scratches, scuffs, and wear, but they also enhance your car’s interior with a touch of luxury and refinement.
✨ High-quality stainless steel – anti-rust & long-lasting
🚪 Custom-fit for Peugeot 408 (2022–2025)
🔧 Quick installation – 3M adhesive, no drilling required
🚗 Protects from scuffs, dirt, and everyday wear
💎 Chrome finish – adds an elegant, premium touch
From daily commutes to weekend getaways, keep your vehicle’s entry points looking flawless. Let your passengers be impressed every time they open the door.
Luxury starts where the door opens. Protect and impress in one move.
Product Features: Chrome products are produced from class A 304 quality stainless steel with a mold system specifically for the part on the vehicle where they will be applied. The products are shipped ready for installation with high quality double-sided acrylic tape on the back. IMPORTANT NOTE; If you think it is incompatible with your vehicle, please do not install it. Returns of any product whose protective tapes have been removed, scratched during installation attempts, or become unsuitable for resale are not accepted. When returning the product, take care to package it as it was sent to you. Assembly Instructions: 1) Install in a dry and dust-free environment. 2) Before assembling, try the double-sided tape on the product in the area where it will be applied without removing its protection. 3)The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5) After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7) During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...