For Vw Volkswagen Passat B8 (2014–2022) Chrome Rear Bumper Lower Trim – 3-Piece Set
$75.00
Regular price $60.00Sleek, Stylish, and Instantly Eye-Catching.
Add a refined touch to your Volkswagen Passat B8 (2014–2022) with this elegant 3-piece chrome rear bumper lower trim set. Crafted for a perfect fit, these trims provide a premium, factory-look finish that enhances the rear profile of your car.
Manufactured from durable, weather-resistant ABS or stainless steel, they’re built to last and add high-end styling to your everyday drive.
✅ Key Features:
-
Specifically designed for VW Passat B8 models (2014–2022)
-
Includes 3-piece chrome trim for the lower rear bumper
-
OEM-fitment with precise contour matching
-
Made from high-quality chrome-finished material (ABS or stainless steel)
-
Weatherproof, rust-resistant, and easy to install (no drilling required)
🔥 Make your exit just as impressive as your arrival – with bold rear-end styling.
Our products have been given a 3D form in special molds to fully contact the relevant parts of the vehicle.
Its assembly is quite simple, anyone can easily assemble it without the need for service. It does not require drilling/cutting to your vehicle during assembly.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
Sleek, Stylish, and Instantly Eye-Catching.
Add a refined touch to your Volkswagen Passat B8 (2014–2022) with this elegant 3-piece chrome rear bumper lower trim set. Crafted for a perfect fit, these trims provide a premium, factory-look finish that enhances the rear profile of your car.
Manufactured from durable, weather-resistant ABS or stainless steel, they’re built to last and add high-end styling to your everyday drive.
✅ Key Features:
-
Specifically designed for VW Passat B8 models (2014–2022)
-
Includes 3-piece chrome trim for the lower rear bumper
-
OEM-fitment with precise contour matching
-
Made from high-quality chrome-finished material (ABS or stainless steel)
-
Weatherproof, rust-resistant, and easy to install (no drilling required)
🔥 Make your exit just as impressive as your arrival – with bold rear-end styling.
Our products have been given a 3D form in special molds to fully contact the relevant parts of the vehicle.
Its assembly is quite simple, anyone can easily assemble it without the need for service. It does not require drilling/cutting to your vehicle during assembly.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
For Vw Volkswagen Passat B8 (2014–2022) Chrome Rear Bumper Lower Trim – 3-Piece Set
$75.00
Regular price $60.00Sleek, Stylish, and Instantly Eye-Catching.
Add a refined touch to your Volkswagen Passat B8 (2014–2022) with this elegant 3-piece chrome rear bumper lower trim set. Crafted for a perfect fit, these trims provide a premium, factory-look finish that enhances the rear profile of your car.
Manufactured from durable, weather-resistant ABS or stainless steel, they’re built to last and add high-end styling to your everyday drive.
✅ Key Features:
-
Specifically designed for VW Passat B8 models (2014–2022)
-
Includes 3-piece chrome trim for the lower rear bumper
-
OEM-fitment with precise contour matching
-
Made from high-quality chrome-finished material (ABS or stainless steel)
-
Weatherproof, rust-resistant, and easy to install (no drilling required)
🔥 Make your exit just as impressive as your arrival – with bold rear-end styling.
Our products have been given a 3D form in special molds to fully contact the relevant parts of the vehicle.
Its assembly is quite simple, anyone can easily assemble it without the need for service. It does not require drilling/cutting to your vehicle during assembly.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.
Sleek, Stylish, and Instantly Eye-Catching.
Add a refined touch to your Volkswagen Passat B8 (2014–2022) with this elegant 3-piece chrome rear bumper lower trim set. Crafted for a perfect fit, these trims provide a premium, factory-look finish that enhances the rear profile of your car.
Manufactured from durable, weather-resistant ABS or stainless steel, they’re built to last and add high-end styling to your everyday drive.
✅ Key Features:
-
Specifically designed for VW Passat B8 models (2014–2022)
-
Includes 3-piece chrome trim for the lower rear bumper
-
OEM-fitment with precise contour matching
-
Made from high-quality chrome-finished material (ABS or stainless steel)
-
Weatherproof, rust-resistant, and easy to install (no drilling required)
🔥 Make your exit just as impressive as your arrival – with bold rear-end styling.
Our products have been given a 3D form in special molds to fully contact the relevant parts of the vehicle.
Its assembly is quite simple, anyone can easily assemble it without the need for service. It does not require drilling/cutting to your vehicle during assembly.
Assembly Instruction:
1- Assemble in a dry and dust-free environment.
2- During installation, the ambient temperature must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.
3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.
4- Clean the surface to be adhered meticulously with a cotton cloth, spirit or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be adhered with oily and additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.
5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.
6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.
7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of
CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the glued part, tape it with paper or packaging tape that you can remove after 24 hours.
Be careful not to wash your car within 24 hours.